YEWISE LED Headlight Assembly for 2022-2025 Honda Civic – Passenger Side (Right / RH), Full LED with Sequential DRL, Low Beam + High Beam + Turn Signal, Chrome Accent, Direct OEM Replacement (OEM# 33100-T20-A52), DOT Compliant

Restore Your 11th-Gen Honda Civic's Signature LED Look

Replace that cracked, hazed, or malfunctioning factory headlight with the YEWISE LED headlight assembly — a direct 1:1 OE replacement engineered specifically for the 2022-2025 Honda Civic (11th generation). Every assembly reproduces the factory's full-LED lighting signature with OEM-grade LED modules, precise beam pattern, and bolt-in fitment.

Vehicle Compatibility

Designed specifically for:

• 2022, 2023, 2024, 2025 Honda Civic — Sedan & Hatchback, LED-equipped trims (LX, Sport, EX, EX-L, Sport Touring)
• Position: Passenger Side (Right-Hand / RH)
• Replaces OEM Part Number: 33100-T20-A52
• ⚠️ This listing is for one (1) headlight — right/passenger side only. Not compatible with Civic Si, Civic Type R, or pre-2022 (10th-gen) Civic models.

What's in the Box

• 1 × Passenger-Side (Right) LED Headlight Assembly
• All LED modules pre-installed and pre-wired — no bulbs required
• 8-Pin OE-style connector — plugs directly into factory harness
• Built-in vertical and horizontal adjustment screws for headlight aiming

Integrated Lighting Functions

Every function is fully LED-powered — no bulbs to replace:

• LED Low Beam — Crisp, white wide-spread illumination for safer night driving
• LED High Beam — Long-throw forward projection for open-road visibility
• LED Daytime Running Light (DRL) — Full-length upper LED light bar matching the factory Civic signature
• LED Turn Signal — Amber signal integrated into the upper light bar
• Reflector Turn Signal — Secondary amber indicator for side visibility
• Connector: 8-Pin OE-style plug — direct fit into factory Civic harness

Lighting Modes

The headlight cycles through four distinct operating modes:

1. Turn Signal (standalone amber)
2. Turn Signal + Daytime Running Light
3. Turn Signal + DRL + Low Beam
4. Turn Signal + DRL + Low Beam + High Beam (all functions active)

Key Features

• 1:1 OE Replacement Fitment — Identical mounting points, bracket geometry, and 8-pin connector to the factory unit. Bolts directly in with no wiring splices, no adapters, no modification required.
• OEM-Grade LED Modules — Separate dedicated LED PCB boards for Low Beam, High Beam, and DRL/Turn Signal functions — matching Honda's original three-board architecture for consistent brightness and accurate color temperature.
• Chrome Accent Housing — Polished chrome inner bezel matches the standard Civic trim appearance.
• Polycarbonate Lens with UV Coating — Hardened, anti-fog, and weather-resistant lens resists yellowing, scratching, cracking, and UV degradation.
• IP65 Sealed Housing — Waterproof and dustproof against rain, snow, car washes, and road debris.
• Built-in Aim Adjusters — Separate vertical (up/down) and horizontal (left/right) adjustment screws for precise beam aiming after installation.
• Road-Safety Compliant — Meets DOT, E/e-Mark, and IATF 16949:2016 automotive quality standards for legal on-road use in North America.

Installation

Professional installation is recommended. Most owners complete the swap in 45–60 minutes per side using basic hand tools. Headlight aim must be re-adjusted after installation for proper beam pattern — use the built-in vertical and horizontal screws shown in the product images.

Peace-of-Mind Warranty

Because LED light sources are integrated and cannot be replaced like traditional halogen bulbs, YEWISE provides a 2-year return and replacement warranty covering:

• LED module failure, flickering, or dimming
• Lens yellowing, fogging, cracking, or leaking
• Trim discoloration or bubbling
• Manufacturing defects
• Incorrect fitment (return for full refund)

Buying Both Sides?

If you need to replace both headlights, pair this passenger-side assembly with the matching driver-side unit (OEM# 33150-T20-A52) for a complete, factory-matched front lighting restoration.

Why Choose YEWISE

YEWISE is a dedicated auto-lamp manufacturing specialist. Every assembly is produced under an IATF 16949-certified quality system used by OEM automotive suppliers — delivering factory-grade reliability at an aftermarket price.