YEWISE LED Tail Light Assembly for 2020-2022 Honda CR-V – Driver Side (Left, Outer / Body-Mounted), Full LED with DRL + Brake + Turn Signal + Side Marker, Direct OEM Replacement (OEM# 33550-TLA-A21), DOT Compliant

Here's the Shopify listing for the driver-side (left) version of the 2020-2022 CR-V tail light:

Product Title

YEWISE LED Tail Light Assembly for 2020-2022 Honda CR-V – Driver Side (Left, Outer / Body-Mounted), Full LED with DRL + Brake + Turn Signal + Side Marker, Direct OEM Replacement (OEM# 33550-TLA-A21), DOT Compliant

(Alternative shorter version: YEWISE LED Tail Light for 2020-2022 Honda CR-V – Driver Side Outer Body-Mounted Replacement, DOT Certified)

Product Description

Restore Your Honda CR-V's Signature Rear LED Look (Facelift Model)

Replace that cracked, fogged, or faded tail light with the YEWISE LED tail light assembly — a direct 1:1 OE replacement engineered specifically for the 2020-2022 Honda CR-V facelift. Crafted to factory specifications with genuine PMMA lenses and OEM-grade LED modules, it restores both the distinctive L-shaped rear signature and the road-legal lighting performance your CR-V left the factory with.

Vehicle Compatibility

Designed specifically for:

• 2020, 2021, 2022 Honda CR-V — all trims (LX, EX, EX-L, Touring, Hybrid)
• Position: Driver Side (Left-Hand / LH), Outer Body-Mounted — the section that stays with the quarter panel when you open the tailgate
• Replaces OEM Part Number: 33550-TLA-A21
• ⚠️ This listing is for one (1) tail light — left/driver side only. Does not include the inner (lift-gate mounted) tail light section. Not compatible with 2017-2019 pre-facelift CR-V (different part number: TLA-A01) or any other Honda model.

What's in the Box

• 1 × Driver-Side (Left) Outer Tail Light Assembly
• All LED modules pre-installed and pre-wired — no bulbs required
• 5-Pin OE-style connector — plugs directly into factory harness

Integrated LED Functions & Specifications

Every function is fully LED-powered — no bulbs to replace:

• LED Brake / Tail Light — 13.5V / 9.8W
• LED Turn Signal — 13.5V / 7.4W (amber)
• LED Daytime Running Light — 13.5V / 1.3W
• LED Side Marker Light — 13.5V / 0.46W
• Connector: 5-Pin OE-style plug — direct fit into factory CR-V harness

Key Features

• 1:1 OE Replacement Fitment — Identical mounting points, bracket geometry, and 5-pin connector to the factory unit. Bolts directly in with no wiring splices, no adapters, no modification.
• Authentic PMMA Lens Material — Made from the same Polymethyl Methacrylate used on the original vehicle, not cheaper PC plastic. Red color closely matches the OEM hue — no mismatched "lighter red" look on one side of the car.
• UV-Resistant & Anti-Fog — Lens resists yellowing, cracking, fogging, and leaking under long-term sun and weather exposure.
• IP65 Sealed Housing — Waterproof and dustproof against rain, snow, car washes, and road spray.
• Advanced Manufacturing — Dual-color injection-molded lens and hot-plate welded seam (≥2mm penetration) for factory-grade sealing and finish.
• Road-Safety Compliant — Meets DOT, E/e-Mark, and IATF 16949:2016 automotive quality standards for legal on-road use.
• OEM-Grade LED Modules — Premium chips and PCB assemblies built to OE specifications for consistent brightness, accurate color temperature, and long service life.

Lighting Sequence

When operating, the assembly cycles through four distinct modes matching the factory CR-V signature:

1. Side Marker + Daytime Running Light (constant white/red perimeter outline)
2. Brake Light (bright red L-shape activated under braking)
3. Turn Signal (amber blinking segment)
4. Combined operation — all functions work simultaneously as needed

Why PMMA Matters

Most aftermarket tail lights use ordinary PC (polycarbonate) plastic, which appears a noticeably lighter, pinker red than the factory lens. Because YEWISE uses the same PMMA material as Honda's original assembly, this replacement matches the passenger-side lens in both color saturation and surface gloss — so your CR-V doesn't look like it had bodywork done.

Pre-Facelift vs. Facelift — Make Sure You're Buying the Right One

The 5th-generation CR-V received a styling refresh for the 2020 model year. The tail light housings look similar but are not interchangeable between the two periods:

Always verify your vehicle year and cross-reference the OEM number on your original tail light before purchase.

Buying Both Sides?

If you need to replace both tail lights (after a rear-end collision, or simply to refresh a sun-faded pair), pair this driver-side unit with the matching passenger-side assembly (OEM# 33500-TLA-A21) for a complete, factory-matched rear lighting restoration.

Installation

Professional installation is recommended. Most owners complete the swap in 20–30 minutes using basic hand tools. No coding, no calibration, and no resistor required.

Peace-of-Mind Warranty

Because LED light sources are integrated and cannot be replaced like traditional bulbs, YEWISE provides a 2-year return and replacement warranty covering:

• LED module failure, flickering, or dimming
• Lens fading, yellowing, fogging, cracking, or leaking
• Manufacturing defects
• Incorrect fitment (return for full refund)

Why Choose YEWISE

YEWISE is a dedicated auto-lamp manufacturing specialist. Every assembly is produced under an IATF 16949-certified quality system used by OEM automotive suppliers — delivering factory-grade reliability at an aftermarket price.