YEWISE LED Tail Light Assembly for 2023-2025 Honda CR-V – Passenger Side (Right, Outer / Body-Mounted), LED DRL + Brake Light + Turn Signal, Direct OEM Replacement (OEM# 33500-3A0-A01), DOT Compliant

Restore Your 6th-Generation Honda CR-V's Signature Rear Look

Replace that cracked, fogged, or faded tail light with the YEWISE LED tail light assembly — a direct 1:1 OE replacement engineered specifically for the 2023-2025 Honda CR-V (6th generation). Crafted to factory specifications with genuine PMMA lenses and OEM-grade LED modules, it restores both the distinctive vertical L-shaped rear signature and the road-legal lighting performance your CR-V left the factory with.

Vehicle Compatibility

Designed specifically for:

• 2023, 2024, 2025 Honda CR-V (6th generation) — all trims (LX, EX, EX-L, Sport, Sport Touring Hybrid)
• Position: Passenger Side (Right-Hand / RH), Outer Body-Mounted — the section that stays with the quarter panel when you open the tailgate
• Replaces OEM Part Number: 33500-3A0-A01
• ⚠️ This listing is for one (1) tail light — right/passenger side only. Does not include the inner (lift-gate mounted) tail light section. Not compatible with 2017-2019 or 2020-2022 5th-generation CR-V (different part numbers: TLA-A01 / TLA-A21).

What's in the Box

• 1 × Passenger-Side (Right) Outer Tail Light Assembly
• LED modules for DRL and Brake Light pre-installed and pre-wired
• Turn signal uses a replaceable PW21W bulb (pre-installed)
• 3-Pin OE-style connector — plugs directly into factory harness

Lighting Functions & Specifications

• LED Brake / Tail Light — 13.5V / 8.6W
• LED Daytime Running Light — 13.5V / 4.3W
• Turn Signal — PW21W bulb, 12V / 21W (amber, replaceable)
• Connector: 3-Pin OE-style plug — direct fit into factory CR-V harness

Key Features

• 1:1 OE Replacement Fitment — Identical mounting points, bracket geometry, and 3-pin connector to the factory unit. Bolts directly in with no wiring splices, no adapters, no modification.
• Authentic PMMA Lens Material — Made from the same Polymethyl Methacrylate used on the original vehicle, not cheaper PC plastic. Red color closely matches the OEM hue — no mismatched "lighter red" look on one side of the car.
• UV-Resistant & Anti-Fog — Lens resists yellowing, cracking, fogging, and leaking under long-term sun and weather exposure.
• IP65 Sealed Housing — Waterproof and dustproof against rain, snow, car washes, and road spray.
• Advanced Manufacturing — Dual-color injection-molded lens and hot-plate welded seam (≥2mm penetration) for factory-grade sealing and finish.
• Road-Safety Compliant — Meets DOT, E/e-Mark, and IATF 16949:2016 automotive quality standards for legal on-road use.
• OEM-Grade LED Modules — Premium chips and PCB assemblies built to OE specifications for consistent brightness, accurate color temperature, and long service life.

Lighting Sequence

When operating, the assembly cycles through three distinct modes matching the factory CR-V signature:

1. Daytime Running Light (constant red vertical light bar)
2. Brake Light (bright red L-shape activated under braking)
3. Turn Signal (amber blinking segment)

Why PMMA Matters

Most aftermarket tail lights use ordinary PC (polycarbonate) plastic, which appears a noticeably lighter, pinker red than the factory lens. Because YEWISE uses the same PMMA material as Honda's original assembly, this replacement matches the driver-side lens in both color saturation and surface gloss — so your CR-V doesn't look like it had bodywork done.

Generation Compatibility — Make Sure You're Buying the Right One

The CR-V was fully redesigned for the 2023 model year. The tail lights are not interchangeable across generations:

Always verify your vehicle year and cross-reference the OEM number on your original tail light before purchase.

Buying Both Sides?

If you need to replace both tail lights (after a rear-end collision, or simply to refresh a sun-faded pair), pair this passenger-side unit with the matching driver-side assembly (OEM# 33550-3A0-A11) for a complete, factory-matched rear lighting restoration.

Installation

Professional installation is recommended. Most owners complete the swap in 20–30 minutes using basic hand tools. No coding, no calibration, and no resistor required.

Peace-of-Mind Warranty

Because LED light sources are integrated and cannot be replaced like traditional bulbs, YEWISE provides a 2-year return and replacement warranty covering:

• LED module failure, flickering, or dimming
• Lens fading, yellowing, fogging, cracking, or leaking
• Manufacturing defects
• Incorrect fitment (return for full refund)

Why Choose YEWISE

YEWISE is a dedicated auto-lamp manufacturing specialist. Every assembly is produced under an IATF 16949-certified quality system used by OEM automotive suppliers — delivering factory-grade reliability at an aftermarket price.